# Replacement studs

**URL:** <https://ecmtb.net/t/replacement-studs/3604>\
**Category:** Bicycling\
**Created:** [January 2, 2016, 5:18pm UTC](https://ecmtb.net/t/replacement-studs/3604 "2016-01-02T17:18:21Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![JeffV](https://ecmtb.net/user_avatar/ecmtb.net/jeffv/32/2029_2.png) [@JeffV](https://ecmtb.net/u/JeffV)\
**Post date:** [January 2, 2016, 5:18pm UTC](https://ecmtb.net/t/replacement-studs/3604/1 "2016-01-02T17:18:21Z")

</div>

Continuing the discussion from [Anyone put on their ice tires yet?](http://ecmtb.net/t/anyone-put-on-their-ice-tires-yet/3592/15):

> [@Anyone put on their ice tires yet?](https://ecmtb.net/t/anyone-put-on-their-ice-tires-yet/3592/15):
>
> I replaced all of my missing studs on Boxing Day and did a pavement ride to hopefully seat them. I rode Evil Birch in the snow last Saturday, but without studs. (Studded tires are on a different set of wheels.)

What stud kit did you use? I’m thinking about getting this kit: [http://www.schwalbetires.com/node/4448](http://www.schwalbetires.com/node/4448)

Evil Birch hey, how is that in the snow?

---

<div class="post-metadata">

**Author:** ![Ghost](https://ecmtb.net/user_avatar/ecmtb.net/ghost/32/1271_2.png) [@Ghost](https://ecmtb.net/u/Ghost)\
**Post date:** [January 2, 2016, 8:22pm UTC](https://ecmtb.net/t/replacement-studs/3604/2 "2016-01-02T20:22:13Z")

</div>

I used the same kit. Got it here along with some other stuff a while back: [http://www.bike-discount.de/en/buy/50-spare-spikes-for-all-schwalbe-spire-tires-67807?currency=5&delivery\_country=210](http://www.bike-discount.de/en/buy/50-spare-spikes-for-all-schwalbe-spire-tires-67807?currency=5&delivery_country=210). Takes a bit of effort to get them in, but there were no instructions and maybe I didn’t have the best technique.

I’d never ridden Evil Birch before. The snow started just before I got there and was coming down quite hard. It made some of the steep and off camber granite sections a bit tricky, but I enjoyed it. Missed the turn back and ended up doing some of the hiking trails before I dug out my phone to have a look.

---

<div class="post-metadata">

**Author:** ![JeffV](https://ecmtb.net/user_avatar/ecmtb.net/jeffv/32/2029_2.png) [@JeffV](https://ecmtb.net/u/JeffV)\
**Post date:** [January 2, 2016, 8:29pm UTC](https://ecmtb.net/t/replacement-studs/3604/3 "2016-01-02T20:29:59Z")

</div>

Goes in from inside out?

Evil Birch is a fun trail with a good leg burner climb, but has some slick rock at the highway entrance.

How was the bridge across the river?

---

<div class="post-metadata">

**Author:** ![Ghost](https://ecmtb.net/user_avatar/ecmtb.net/ghost/32/1271_2.png) [@Ghost](https://ecmtb.net/u/Ghost)\
**Post date:** [January 2, 2016, 10:55pm UTC](https://ecmtb.net/t/replacement-studs/3604/4 "2016-01-02T22:55:42Z")

</div>

No, they go in from the outside. This video is what I used as a guide: [https://www.youtube.com/watch?v=YBLPJwbWbZE](https://www.youtube.com/watch?v=YBLPJwbWbZE). I probably had to replace about 25 or 30 and I ended up with a good size blister on my thumb.

The bridge seemed fine. It was covered with snow so I walked it. Wasn’t up for a swim.

---

<div class="post-metadata">

**Author:** ![Rolls](https://ecmtb.net/user_avatar/ecmtb.net/rolls/32/20889_2.png) [@Rolls](https://ecmtb.net/u/Rolls)\
**Post date:** [January 5, 2016, 5:14pm UTC](https://ecmtb.net/t/replacement-studs/3604/5 "2016-01-05T17:14:21Z")

</div>

Good stuff. My Schwalbes are missing a few too and I was wondering about this.Thx

---

<div class="post-metadata">

**Author:** ![brightwhite](https://ecmtb.net/user_avatar/ecmtb.net/brightwhite/32/1314_2.png) [@brightwhite](https://ecmtb.net/u/brightwhite)\
**Post date:** [January 5, 2016, 5:20pm UTC](https://ecmtb.net/t/replacement-studs/3604/6 "2016-01-05T17:20:54Z")

</div>

I picked up a set of used Suomi studded 2.1s, made by Nokian. They’re missing about a dozen studs. I wonder if this kit would work with them as well.

The Nokian replacements are nearly double the price and don’t come with an install tool.

---

<div class="post-metadata">

**Author:** ![pmachan](https://ecmtb.net/user_avatar/ecmtb.net/pmachan/32/4421_2.png) [@pmachan](https://ecmtb.net/u/pmachan)\
**Post date:** [January 5, 2016, 7:19pm UTC](https://ecmtb.net/t/replacement-studs/3604/7 "2016-01-05T19:19:21Z")

</div>

I just picked up a stud kit from Bikes Plus, its the Schwalbe one, comes with the tool, $30.
